ADJUSTABLE HEAD TELESCOPIC LED TABLE LIGHT SETUP INSTRUCTIONS

ADJUSTABLE HEAD TELESCOPIC LED TABLE LIGHTING SETUP

Table clamp lighting with adjustable head

EASY & QUICK ADJUSTABLE HEAD TELESCOPIC LED TABLE LIGHT SETUP INSTRUCTIONS (TABLE MOUNT.) READ BEFORE USING & WATCH THE SETUP VIDEOS INCLUDED. 

SINGLE HEAD ADJUSTABLE HEAD TELESCOPIC TABLE LIGHT SETUP

Step #1

Rest the base plate on the top edge of the table. Align the base plate straight with the table edge. 

Step #2

Place the top jaw of the clamp on the “center” of the base plate, directly in front of the pole.

Step #3

Squeeze the bottom jaw of the clamp tight against the bottom of the table, while holding it with your left hand. With your right hand turn the twist handle of the clamp counter clockwise until securely tightened.

 Step #4

Attach the LED light bulb module to the standard head or extended head assembly and tighten the thumb screws while adjusting the LED light bulb module in the desired position. Make sure the thumb screws are firmly tightened before going any further.

Step #5

Slide the head and bulb assemble onto the telescopic pole and make sure it is all the way attached.

 Step #6

Attach the 6ft power cord to the light and it will come on. Give it a twist around the telescopic pole and use the velcro straps to keep the power cord nice and neat against the pole.

 Step #7

Open top latch on the telescopic pole and fully extend. Close the latch to lock in place. 

Step #8

Open second latch on the telescopic pole and fully extend. Close to lock in place. Open third latch on the telescopic pole and fully extend. Close to lock in place. Stand back and look at your stunning trade show lighting. See what a difference our display lighting makes in your trade show displays.

WATCH THIS SETUP VIDEO BEFORE USING YOUR ADJUSTABLE HEAD TELESCOPIC LED TABLE LIGHTS (TABLE TOP MODEL)

Bright LED tab;e clamp lightsDUAL HEAD ADJUSTABLE HEAD TELESCOPIC TABLE LIGHT SETUP

Step #1

Rest the base plate on the top edge of the table. Align the base plate straight with the table edge. 

Step #2

Place the top jaw of the clamp on the “center” of the base plate, directly in front of the pole.

Step #3

Squeeze the bottom jaw of the clamp tight against the bottom of the table, while holding it with your left hand. With your right hand turn the twist handle of the clamp counter clockwise until securely tightened.

Step #4

Slide the dual head adapter onto the top of the telescopic pole and lock in place. Attach the LED light bulb module to the head assembly and tighten the thumb screws while adjusting the LED light bulb module in the desired position. Make sure the thumb screws are firmly tightened before going any further. Repeat for the second module and adjust the lights to the desired position.

Step #5

Attach the Y power cord adapter to the LED modules and hold in place with the provided velcro strap.

Step #6

Attach the 6ft power cord to the light and it will come on. Give it a twist around the telescopic pole and use the velcro straps to keep the power cord nice and neat against the pole.

 Step #7

Open top latch on the telescopic pole and fully extend. Close the latch to lock in place. 

Step #8

Open second latch on the telescopic pole and fully extend. Close to lock in place. Open third latch on the telescopic pole and fully extend. Close to lock in place. Stand back and look at your stunning trade show lighting. See what a difference our display lighting makes in your trade show displays.

 

BULBS INFORMATION & WARRANTY
You can safely use almost any E27 base bulbs from 25W up to 150W each socket. DO NOT EXCEED 200W MAXIMUM. Show Off Lighting Pop Up lights come with a (2) year warranty on each COB LED bulb from manufacturing defects. Replacement bulbs will always be available from Show Off Lighting for a reasonable price.

WARRANTY (INCLUDING BULBS)
Show Off Lighting is guaranteed for a (2) year warranty from manufacturing defects. If there is a defect we will fix it at no charge. Simply return the light to our Denver, North Carolina facility. Accidental damage can be repaired quickly and easily by contacting us. Warranty excludes bulbs.