INSTALLATION INSTRUCTIONS FOR SUPER CLAMP LIGHTS. READ BEFORE USING AND WATCH SETUP VIDEO INCLUDED.
1) Open the clamp to its widest point and clamp onto the pipe and drape booth pole above your display or tent frame. Tighten the clamp to the pole securely to prevent it from falling. Do not use pliers or tools to tighten as damage may result.
2) Adjust the super clamp trade show lighting to the desired angle and tighten the round black clamp knob securely with your hand using no tools.
3) Plug in the master power cord to the first light and daisy chain to the second light and repeat setup for up to (6) lights maximum.
DAISY CHAIN UP TO (6) SUPER CLAMP TRADE SHOW LIGHTS MAXIMUM.
Please do not hang banners (or anything else that would block airflow) within 4 inches of this light, it will disrupt the airflow to the fan and cause the LED chip to overheat.
WATCH THIS INSTALL VIDEO BEFORE USING THE SUPER CLAMP LIGHT
FAQ: What is the proper spacing for this COB LED super clamp light? Ideally one of these lights should be placed 5ft to 7ft apart for bright and consistent coverage along the length of your booth.
How long will it take to setup the COB LED super clamp lights in a typical 20ft booth & how many lights will it require? With pipe and drape poles already in place, a typical L shaped 20ft booth will require 4 or 5 lights and take about 10 minutes to setup.
What are the power requirements? Our 60w super clamp light is 60 actual watts of power or 0.5MPS at 120V and 90 to 260VAC
Are the Show Off Lighting 60w COB LED super clamp lights Las Vegas approved & can anyone rent these lights for the shows? Yes the 60w LED super clamp lights are Las Vegas approved.
(2) year warranty included on this product and 30 day money back guarantee.