LED INTERIOR SHOWCASE LIGHTING SETUP

Jewelry showcase lighting fixturesEASY AND QUICK INTERIOR SHOWCASE DISPLAY LIGHT SETUP INSTRUCTIONS. PLEASE READ INSTRUCTIONS BEFORE USING.

MAKE SURE THE GLASS IN YOUR SHOWCASE IS CLEANED PRIOR TO INSTALLING

Step #1 

Install the suction cups by hooking one end over the edge of the bar and press the other end over the opposite edge until you feel it snap in place. Suction cups should be set about 1 to 2 inches from either end of the light. 

Step #2

Plug the 5ft extension cord into the pigtail end attached to the light.

Step #3

Plug the power supply into the other end of the 5ft extension cord. 

Step #4

Attach the interior showcase light to the inside, top front edge, of the showcase by pressing the suction cups tightly against the glass. You can also attach it to the interior front or interior top of the showcase whichever you like best.

Step #5

Feed the cable through your showcase door and plug the power supply unit into a power outlet. Your lighting will come on automatically once plugged into the power outlet.

NOTE:

These LED interior showcase lights work with most glass showcases and our 28″ LED interior showcase light is the perfect size for Arizona Case in case lighting. 

WATCH THIS SETUP VIDEO BEFORE USING YOUR IN CASE SHOWCASE DISPLAY LIGHTS